MICROWAVE POWER METER XPM10
The model XPM10 is a low cost, high performance
power meter using a power sensor. The power meter
can measure power levels from -30dBm to +20dBm and
cover frequencies from 8.2GHz to 12.4GHz covering
complete X band. The power meter is designed to easily
measure Gunn and Klystron Source outputs.
The high dynamic range is useful for experimentation in
microwave test benches.
Features:
* 8.2 GHz to 12.4GHz measurement range
* Bar Graph Display on backlit LCD
* Wide power range +20dBm to -30dBm
* High measure speed at all power levels
* dB relative mode
* Measurement in dBm, mW, dBr, dBW, dBuW
* Shock/Drop resistant Sensor
T
echnical Specifications
POWER METER
Frequency range : 8.2GHz to 12.4 Ghz (X Band)
Power range : -30dBm to +20dBm
Measurement : dBm, dBr, mW, dBW, dBuW
Analog display : Bar Graph
Ranging : Auto-ranging
Sampling : 1,10,100 readings per sec.
Display Offset : +20.0 to -30.0dBm for
relative measurement
Resolution : 0.1, 0.5 and 1dB
Test Output : 10GHz at 0dBm
Calibration factor : +3.0dB to -3.0dB in 0.1dB
steps
Sensor zero : Auto zero
Display : 16X2 Backlit LCD
Power : 230V +/- 10% AC
POWER SENSOR
RF Connector : X-band waveguide
Impedance : 50 ohms
Maximum input : +20dBm
Return Loss : 20dB at 12.4GHz
Cable : Sensor/meter cable 3m