|
Product Description :
Microstrip Training System Lab MIC 20 Features: Amitec Model MIC20 uses a broadband Microwave source working over a bandwidth from 2-4 Ghz, 10MHz-12.4 Ghz power meter and 2-8 Ghz directional coupler. Several modules using low loss substrate are provided with etched surface mounted circuits. Gold plated SMA connectors are provided on each modules for repeatable connections. Teflon cables are provided for low loss interconnects. * 2-4 GHz source * 10 MHz-12.4 GHz Power meter. * 2-8GHz directional coupler with >20dB directivity * Over 10 different MIC modules provided * Gold plated SMA connectors on low loss substrate * 0.1dB resolution LCD with bargraph * Wide power range +20dBm to -30dBm * High measure speed at all power levels * Measurement in dBm, mW, dBr, dBW, dBuW, dB relative * Shock/Drop resistant Sensor
Amitec MIC20 Technical Specifications: Microwave Source Microwave Source : 2 GHz to 4GHz Frequency Display : LCD Power level : 10dBm typical Output Impedance : 50 Ohms Power Supply : 100-240VAC, 47-63 Hz
Microwave Power meter Frequency range : 10MHz to 12.4 Ghz Display : 16X2 Backlit LCD Power range : -30dBm to +20dBm Resolution : 0.1, 0.5 and 1dB Measurement : dBm, dBr, mW, dBW, dBuW With Digital Display Ranging : Auto-ranging Sampling : 1,10,100 readings per sec. Relative Offset : +20.0 to -30.0dBm for relative measurement User setting : +3.0dB to -3.0dB in 0.1dB step Level Indicator : Bar Graph Power : 100-240VAC, 47-63 Hz
Power Sensor Connector : SMA Frequency Range : 10 MHz to 12.4 Ghz Compensation : Temperature compensated Thermistor Impedance : 50 ohms Maximum input : +20dBm Return Loss : 15dB at 12.4GHz Cable : Sensor/meter cable 3m
Directional coupler Frequency Range : 2-8GHz Coupling : 10dB Frequency sensitivity : 0.25dB Directivity : >20dB Insertion Loss : <1dB including coupled power Max VSWR Any port : 1.2 Connector : SMA
Active Circuits: Microwave Amplifier & Switches 1 MMIC Amplifier: Gain = 10dB 2 SPST PIN diode switch: Isolation = 10dB Passive Circuits: Power divider 3 Wilkinson Equal Power Divider: cf = 3Ghz 4 Wilkinson Unequal Power divider: cf = 3Ghz Coupler 5 Quadrature hybrid/Branchline Coupler: cf = 3GHz 6 Folded Lange Coupler: coupling = 6dB, cf = 3GHz 7 Unfolded Lange Coupler: coupling = 6dB, cf = 3GHz 8 180 deg. Rat-Race Hybrid Ring Coupler: cf = 3GHz 9 Coupled line Coupler: coupling=20dB, cf = 3 GHz Filters 10 Low Pass filter: fco = 3Ghz, S12 at 4Ghz = 20dB 11 Coupled Line Band pass filter Zo = 50 Ohms, cf = 3Ghz Resonators 12 Ring Resonator: cf = 3 GHz 13 Half wave resonator: cf = 3GHz Antennas 14 Patch Antenna: cf = 2.4GHz 15 Log Periodic Antenna: cf = 2-4 GHz Impedance Matching 16 Tapered Line transformer: 50 -100 Ohms, cf = 3 GHz 17 Matched Load 18 Mismatched load Attenuator 19 Fixed attenuator PIN diode switchable 20 Variable attenuator PIN diode
Accessories: Termination X2, Short, SMA(M)-SMA(M) Adapters, SMA(F)-SMA(F) adapter, SMA(M)-SMA(M) RG316 cables, Attenuator 20dB, SMA connectors X5
E-Manual: Installation Video for ease of Learning
Area and scope of Experiments: * Measurement of S11, S12, S21, S22 parameters of All the components * Substrate dielectric constant using ring resonator * Power division ,isolation and return loss characteristics of power dividers * Coupling and directivity of directional coupler * Low pass, band pass filter characteristics * Antenna return loss measurement
|
